Just follow these 4 simple steps to install or paste the Decoraids Decorative Ceiling Tiles

1. Prepare the surface: Wipe off the ceiling or surface and make it smooth and even. Also, remove any loose plaster, loose paint, loose wallpaper etc.

2. Draw an angel: Draw straight lines in the corner ( in width and length part ) and make a 90 degree angle as a starting point of pasting the tiles. OR draw x and + in the ceiling and get the center point of the ceiling and start pasting the tiles from the middle and any of the corner of the +.

3. Apply the adhesive: Apply any good quality rubber adhesive or contact cement only on the edges and the raised cross sections of the sheet, and let it be dry and the adhesive becomes tacky. Please check the drying time on the pack of the adhesive. Usually it is anywhere between 8 to 15 minutes.
Apply a thin layer of the adhesive. We suggest applying the adhesive on the ceiling also for better bonding and strength. Approximately, 1 Kg Adhesive will require to cover 100 square feet area.

4. Place & Press: Place he sheet in the required position and press firmly but gently. Overlap the edges of the previous sheet with the new sheet, and press firmly with fingertips.