Just follow these 4 simple steps to install or paste the Decoraids Victorian Ceiling Tiles.

1. Prepare the surface: Wipe off the ceiling or surface and make it smooth and even. Also, remove any loose plaster,         loose paint, loose wallpaper etc.

2. Draw an angel: Draw straight lines in the corner ( in width and length part ) and make a 90 degree angle as a starting     point of pasting the tiles. OR draw x and + in the ceiling and get the center point of the ceiling and start pasting the     tiles from the middle and any of the corner of the +.

3. Apply the adhesive: Apply any good quality rubber adhesive or contact cement only on the edges and the raised    cross sections of the sheet, and let it be dry and the adhesive becomes tacky. Please check the drying time on the    pack of the adhesive. Usually it is anywhere between 8 to 15 minutes.
   Apply a thin layer of the adhesive. We suggest applying the adhesive on the ceiling also for better bonding and    strength. Approximately, 1 Kg Adhesive will require to cover 100 square feet area.

4. Place & Press: Place he sheet in the required position and press firmly but gently. Paste the border piece of the     same design and the main 2'x2' sheet alternatively.

For more detailed instructions please contact us on info@decoraids.in